Brake & Clutch Fluid DOT 4
კონტექსტი: Volkswagen (VW) (EU) Polo V — Polo V 1.4 BiFuel · 2010–2011 · ← რეკომენდაციებში დაბრუნება
ტექნიკური მონაცემები
მწარმოებლის ოფიციალური მონაცემებისტანდარტები და სპეციფიკაციები
ტიპიური მახასიათებლები
მწარმოებლის აღწერა EN
A high performance non-mineral brake fluid. Based on glycol ethers and specifically developed for hydraulic brake systems. The high boiling point of Brake & Clutch Fluid DOT 4 guarantees safe driving and means additionally that it is safe for all materials within the brake system. It is recommended that brake and clutch fluids are refreshed every two years.
Applications
- Brake & Clutch Fluid DOT 4 is suitable for all disc- and drum- braking systems, used in passenger cars, trucks and other vehicles, requiring DOT 4 level of performance.
- Can be mixed with other brake fluids which are based on glycol ether or borate ester and have similar specifications. The product should not be mixed with silicone type or silicate type brake fluids.
- Brake fluid should be drained from the vehicle every two years or 40.000 kilometers (24.000 miles) and refilled. Check your owner’s manual for details.
- Use only in its concentrated form out of a previously unopened or well sealed container. Always close the container directly after use, as the fluid absorbs moisture from the atmosphere, which reduces the service life of the product considerably. Never use drained brake fluid. Brake fluid can affect the vehicle paintwork, so remove spills immediately without rubbing .
Features & Benefits
Brake & Clutch Fluid DOT 4 provides excellent performance under severe conditions, such as sport style and mountain driving.
Excellent viscosity-temperature properties over a very high and low temperature range. Stable viscosity over a long period.
Brake Fluids are hygroscopic which means that condensation water is absorbed which slowly lowers the boiling point influencing the brake performance It is therefore recommended that the product is refreshed every 2 years. Brake & Clutch Fluid DOT 4 has a high (265°C.) dry boiling point. The product can be mixed with other DOT 3 or 4 products.