KA +995 599 36 84 55
AMSOIL DOMINATOR® DOT 4 100% Synthetic Racing Brake Fluid
AMSOIL

DOMINATOR® DOT 4 100% Synthetic Racing Brake Fluid

Category: Brake fluid
32 ₾ / 355 mL Same-day delivery, Tbilisi only — 15 ₾ · returns within 14 days · Details

AMSOIL DOMINATOR® DOT 4 100% synthetic racing brake fluid: boiling point 304°C (dry) and 210°C (wet). Firm pedal and low compressibility in extreme racing conditions.

Manufacturer page →

Description

The extreme pressure and heat of the brakes bring the fluid to a boil; the fluid vaporizes and the pedal becomes soft and unreliable (vapor lock). Water that has entered the fluid accelerates this process.

DOMINATOR® DOT 4 Racing Brake Fluid has a boiling point far higher than the DOT standard, even when the fluid has absorbed 3.7% water. During manufacturing, each bottle gets a nitrogen blanket to drive out moisture.

Main specifications (manufacturer's data)

  • Boiling point: 304°C (580°F) dry and 210°C (410°F) wet (ERBP) — the DOT 4 minimum is 230°C / 155°C
  • Maintains low compressibility in the most extreme racing conditions
  • Stable viscosity over a wide temperature range and good flow at high pressure
  • Firm, reliable pedal
  • The bottle is nitrogen-protected against moisture

When to use

  • For racing use where a DOT 4 fluid is required; also used in hydraulic clutch systems if the manufacturer calls for DOT 4
  • For best results, change the fluid once a year
  • Do not mix with DOT 5 (silicone) fluid

The specifications are AMSOIL's official data. Before use, read the instructions given on the packaging.

Technical data

Manufacturer's official data · G2476 10/26

Standards and specifications

Typical properties

Boiling point (dry), °CFMVSS 116304
Boiling point (wet), °CFMVSS 116210
Kinematic viscosity at −40°C, mm²/s1550
Kinematic viscosity at 100°C, mm²/s2.0
Packaging: 12 oz. Bottle · Each / Case · BFRCN
Manufacturer description

The extreme pressure and high heat common to brake systems can push brake fluid beyond its boiling point, causing it to vaporize or "boil-off." Water contamination can accelerate the process. This leads to a spongy or unresponsive feeling in the brake pedal (vapor lock). In contrast, the unique chemistry behind AMSOIL synthetic brake fluids increases boiling points well beyond DOT standards, even when contaminated with 3.7 percent water. AMSOIL Brake Fluids maintain a stable viscosity over a wide temperature range and flow easily at the high pressures generated in today's automotive brake systems to deliver solid, reliable braking. A nitrogen blanket is added to each bottle during manufacturing to purge moisture and ensure the maximum level of performance.

Technical sheet (PDF, EN)

Bought this product? Log in and write a review.